Applicable to sitting of BOPP/PVC/PE/masking paper/imported high-grade double- sided tape/kraft paper tape/conductive foam rubber/fabric backing/industrial adhesive tape/protective film etc.
1. Principal machine drive part: AC motor from Taiwan with inverter for driving coil cutting,fast acceleration and deceleration.
2.Central control unit: adopting programmable central control; it's possible to set a number of sizes (up t0 50 types) in the same shatt; automatic switching to cutting once realizing fully automatic operation.
3.Operation panel: adopting 10.4-inch Shilin LCD touch screen from Taiwan, with which the cutting conditions and operation conditions can be directly setting through the display.
4.Motor control system: with central control of PLC; a number of sizes can be set for the same shaft; cutting width adjusted automatically on the computer.
5.Cutting positioning system: adopting Japanese and European servo motors as the control; imported high-precision ball screw for size positioning and use of linear sliding rail to hold the tool, rendering accurate and smooth positioning.
6.Knife advance positioning system: knife advancement controlled with Japanese and European servo motor; 3-speed knife advancement for cutting is possible, which promotes the efficiency and renders high quality.
7.Automatic angle adjustment of circular knife: Japanese and European servo motors adopted for circular knife angle change that is different depending
on the material type(angle adjustment range +8° ). In case of poor cutting plane, the cutting angle can be changed directly so as to reduce times of knife change and avoid trouble of manual angle adjustment, substantally promoting the production efticiency.
8.Quick shaft replacement unit: there are two types of cutting shafts available for selection. it adopts quick shaft changing method to meet the requirements of different materials.
9.(Optional)Installed with large protective hood to substantially improve operation safety.